Hello,

I have an issue again.

This time it's with a workstation (Dell Optiplex 3040 i3).

It's still the same, <100 MB uploaded data and only one partition.

I also tried with another workstation (Dell Optiplex 3080), but still the same.

I don't understand, it usually works with this kind of device. I never had any trouble with it before!

I upgraded the Theopenem version to the last one (1.4.8), but still the same...

There is a "Broken Pipe" error...

I attach here the upload log.

If you would like to check the uploaded log of my last image (where I had no any issue during the upload process), I attach it here too.

Thank you for your help, I really need it...

18_66_DA_4B_F2_54-unregupload.txt
A4_BB_6D_7C_01_99-unregupload-last-time-the-upload-worked.txt

I just tried with another SSD on the same machine with the same OS but MBR, and it's still the same issue. <100MB uploaded.

00_E0_4B_74_D4_03-unregupload.txt

The bitlocker is not enabled.

This time, I only have the partition 2 which has uploaded 13,3MB. Others partitions show the same.
The upload process is much quicker than a normal upload.

I wonder if it's not because the disk is GPT, because the first time I uploaded an image with the same OS and the same machine it was MBR and it worked.

I really don't understand why with this OS I have this kind of issue...

Sorry to bother you with this...

Hi,

I tried what you told me, but it's still the same...

The OS is Windows 10 LTSB.

00_E0_4B_74_D4_03-unregupload.txt

I tried to capture a new image.
When I check it on web UI, I can sse it makes less than 100 mb.

When I check the image schema, there is no image file found for the first two partitions and the third one has no server size.

Something goes wrong with the upload process.

I attach the upload log of this image.

Thanks for your help.

00_E0_4B_74_D4_03-unregupload.txt

Hi, could you please help me with this ?

Thanks.

Hello,
I'm encountouring an issue again.
I deployed my image in order to make some changes on it.
But when I uploaded it, and try to deploy it again, it displays some errors.
So I tried to change the deploy image profile to standard, as you adviced me, but it's still not working.
Here attached the upload and deploy logs.
I put both deploy logs (with dynamic method and standard).

Thank you for your help.

00_E0_4B_74_D4_03-unregdeploy-dynamic.txt
00_E0_4B_74_D4_03-unregdeploy-standard.txt
00_E0_4B_74_D4_03-unregupload.txt

I am able to deploy the image now !
However, when I changed the create partitions method to standard, I had to select only the main partition with the operating system. I don't know if it's normal.
I had also the following message :
"When Using A Standard Partition Layout Only One Partition With The Operating System Can Be Active."

Also, when I deploy the image, I still have some errors at the beginning of deployment despite it works.

00_E0_4B_74_D4_03-unregdeploy (1).txt

How can I change the Create Partition Method ?

In Admin Settings > Image Profile Templates
I change the Image Type to WinPe
and the Create Partition Method to Standard (I don't forget to update Templates).

But when I deploy an image, the log file still shows as dynamic.