Hello, I work with theoopenem for my notebook images and everything has worked without any problems to date.
I have purchased new notebooks and now have to create a second image for the new devices. Is there anything to consider here? I'm grateful for every tip! Best regards
...as far as I can see, only one TFT server is active (tftpd32 for use with Thoepenem - see photo).
I found this in the forum. Could this be the solution? If so, where can I make the extension:
To reply to myself, the problem was this:
set ComServerURL=http://10.1.36.30/
It NEEDS to have port set up, too. It should look like this:
set ComServerURL=http://10.1.36.30:8888/
Now just to learn how to set up HR keyboard, that would be grand 
anyone?
EDIT: I'm dumb. Configuration for keyboard is in CMD file for building WIE.
@itisljar Hi, I have the same problems. Where you changed those stettings? Bests...
Hello,
unfortunately there is a problem with the PXE boot:
Theopenem 1.5.2
Winsrv 2019
.Net 4.8
Image client: ASUS P550L
The DHCP_Server spends its IPs from another client with dhcpsrv2.5.2
During the first PXE boot I get an error message (see photos): PXE-E11: ARP timeout
I have already tested all PXE settings and also changed the kernel. Unfortunately all without success.
Where could the error be found?
Best regards
The problem is solved.
As reported, updates were carried out on the deploy notebook and the BIOS was also updated. After the BIOS on the other notebooks has also been updated, it works again.
Question: After each image download, a new Windows bootloader seems to be set up (Pic. 1 = Deploy notebook; Pic. 2 = after Image download) The current version 1.3.3 of Theopenem is installed.
How do you proceed if the image is only to be updated?
Pic 1
Pic 2
@theopenem_admin Version 1.3.3. In the meantime I have completely deleted the old image and created and uploaded a new image. Unfortunately the same effect.
The first image could be successfully downloaded to 20 notebooks and everything ran very stable even in connection with Reboot RX.
Today the image was updated (Windows updates, software installations). After the download, the clients no longer work. Here is the result in the video (30 sec)
https://photos.app.goo.gl/HyEDWC4wMACkfX9B6
The devices start and then hang in a loop. Where could be the problem. The upload log is attached.
@theopenem_admin Great. Is there a donation box somewhere where we can deposit something?
