@theopenem_admin
Quick question on the SMB thing. I'm having issues, but if I continue, I'll post a new thread for it.

Do I need to have SMB enabled before capturing the image, or should I be able to capture an image with Local Storage enabled, and then change to SMB to deploy that same image?

@theopenem_admin
Thanks!

Just to clarify, the direct to SMB thing, I'd love to test.

Admin Settings -> Storage Location -> Storage Type = SMB
Storage Path = \servername\netshare
Admin credentials
-no domain (none here)

Anywhere else/other settings I should adjust for that? Just so long as permissions are good on the share drive.

@theopenem_admin
Thanks for the fast response. I took a look at the longs, and it occurred to me that there was a 'space' in my image named "Tournament Image". I removed the space, and that was it. Making a big note for that later lol.

Now it seems there is a different issue. Do you have any thoughts to the timeouts that are suddenly occurring? Not sure if this is network or theopenem related. Just looking for insight.

Much appreciated!

Hello, I am just setting up TOEMS and I ran across an issue.
I was am able to capture a small image ~20GB with no issues. (PC-01 upload)
I am not able to capture a larger image, ~800GB at all. I receive the Image Schema error. PC-02 was attempted with a high compression level, while PC-04 was attempted with a lower compression level.

A quick bit of information as well: The image that resides on PC-02 and 04 is the same as PC-01 except there are additional games installed (quite a few lol). I used a different program to image those PC's though.

Any help would be appreciated. We are exploring this new method in hopes of speed and consistency increase.

success-1002-PC-01-upload.txt fail-1002-PC-04-upload.txt fail-1002-PC-02-upload.txt