@theopenem_admin I should add that I have 2 openem servers sharing this location, do I need to setup the 2nd server differently than the first server:

Topology:

Colorado network One Openem server with PXE
California network One Openem Sever with PXE

Both share the same smb directory

The image that I am trying to use was uploaded on the Colorado network

Any help is appreciated !

Thanks,

Aran

@neorad84 however when I attempt to image now with the new location I am getting this error

do i need to rebuild my WIE images to make this work correctly ?

Thanks,

@theopenem_admin yes I do I think i got it to work it has to have another images folder under the sub directory that I had in place, they are now all showing up ! Thanks for the quick response !

Hi All,

I am having a heck of a time getting my SMB share moved from its old location to its new location. This is what I have done so far:

1. Created a new shared directory (SMB Share) It has all of the same permissions as the old share
2. copied all of the images from the old directory to the new directory
3. updated the Storage Location in Theopenem admin panel
4. Go to images and it doesn't see them.
5. If I change the storage back to the old location it see them fine (in the old directory)

What steps am I missing here is there something else i need to do like a config file change or a reboot of the server ?

Any help is appreciated I am stumped at this point !

Thanks,

Aran

@theopenem_admin I was able to get this fixed, I needed to point to each of the different ARCH to their respective bootmgfw.efi once I did this the WIM images worked just as expected ! Thanks for all of the help and assistance !

@edwinjamess This fixed my problem instantly thanks for posting this fix !!!

@theopenem_admin

I am using Windows DHCP for this but not 100% sure what files i am to point to for it to do the boot can you assist me with that (there haven't been any instructions that I have found showing what each of the boot files are suppose to be this is what i have right now

UEFI 64 Bit:

UEFI 32 Bit:

BIOS:

Am i suppose to point this to a different location ? did i miss something in the how to's ?

Thanks,

@theopenem_admin

I have done this not sure what the problem is at all im assuming this will fix my secure boot thing as well (im on the 3rd round of making these images again ) Ill see what happens but may need to purchase support!

Made some progress, I can now get it to boot to the WIM images but not receiving this error on them

Hi All,

I am having a huge issues with secure boot working, I have to shut off my secure boot and boot to the Linux files, and it works but I can't use WinPE the files that have been created by using the WIE_Builder. I have them in the location I think they are suppose to be in (instruction are vague at best) but it still won't boot. I need help with the following items.

1. Where do i put the files that the WIE builder creates Currently they are here( C:\Program Files\Theopenem\tftpboot\images)
2. If these images are secure boot why won't the computer use them
3. How do I make Theopenem use these images vs the predefined Linux boot files.
4. I can't generate the USB iso's when I attempt to download them from the server they comedown as a clientboot.iso (all of 2k in size)

I also need to know if there is additional settings for DHCP to tell it to use the WIM images that WIE builder creates

over all need some assistance here I can provide what ever is needed for this. Or if someone has a how to guide out there for this portion of the install that would be great.

I just need to get secure boot, and the WIM and PXE working with them.

Thanks, in advance !