@theopenem_admin said in Attempting to enable Proxy DHCP:
your proxy config
See below thanks!
;Config File For Toems Proxy DHCP Server [settings] ; LISTEN-DHCP sets the server to listen for pxe boot dhcp offers and apple netboot dhcp informs on port 67 ; Can be false if Toems Proxy DHCP is installed on the same server as your DHCP Server and option 60 is set to PXEClient on that DHCP Server ; Valid values: true | false listen-dhcp=true ; LISTEN-PROXY sets the server to listen for pxe boot proxy dhcp requests on port 4011 ; Must be true for PXE booting ; Valid values: true | false listen-proxy=true ; INTERFACE sets the nic you want to listen on. ; Any interface can be specified with 0.0.0.0 ; If running on Linux with Mono, you must use 0.0.0.0 ; Valid values: A single IPv4 address | 0.0.0.0 interface=0.0.0.0 ; NEXT-SERVER sets the IPv4 address of the tftp server ; Value is required ; Valid values: A single IPv4 address next-server=192.168.99.251 ; COMSERVER-URL sets the optional url for the com server comserver-url=http://192.168.99.251:8888/ ; CHECK-WEB-RESERVATIONS check the Toems server for static computer boot reservations ; Valid values true | false check-web-reservations=true ; CHECK-TFTP-CLUSTER check the Toems server for tftp cluster groups ; Valid values true | false check-tftp-cluster=false ; TFTP-POLLING-INTERVAL when using clustered tftp server, how often to check to see if they are up ; Valid values number (in seconds) tftp-polling-interval=30 ; ALLOW-ALL-MAC sets the server to respond to all pxe boot or netboot requests or limit to only those set in the allow file ; Valid values true | false allow-all-mac=true ; BIOS-BOOTFILE sets the file that is loaded for legacy bios clients, both x86 and x64 ; Path is relative to your tftp base folder ; If using with Theopenem, it should always be proxy/bios/pxeboot.0 bios-bootfile=proxy/bios/pxeboot.0 ; EFI32-BOOTFILE sets the file that is loaded for efi x86 clients ; Path is relative to your tftp base folder ; If using with Theopenem, it should always be proxy/efi32/pxeboot.0 efi32-bootfile=proxy/efi32/pxeboot.0 ; EFI64-BOOTFILE sets the file that is loaded for efi x64 clients ; Path is relative to your tftp base folder ; If using with Theopenem, it should always be proxy/efi64/pxeboot.0 efi64-bootfile=proxy/efi64/pxeboot.0 ; SERVER-IDENTIFIER-OVERRIDE sets the Server Identifier ; By default this value is set to the inteface value when empty, except in cases where it cannot be, such as an interface set to 0.0.0.0 ; Valid values: A single IPv4 address server-identifier-override=192.168.99.251