Image Upload always hangs at 9.86%
-
Are there any files in the images/imagename directory?
-
@theopenem_admin
There's a schema file, and an hd0 folder, inside which is a table file. -
What hypervisor, could be a kernel issue
-
@theopenem_admin
Windows 10, HyperV. -
Have you tried disabling the firewall to rule that out
-
@theopenem_admin
assuming you mean on the HV host, not on the machine being imaged?
If so, yes - just disabled firewall and rebooted/re-ran a new image upload.
9.86% and holding, same 2 files in local storage, no progress. -
On the server where Theopenem is installed
-
@theopenem_admin
yep. Toem server is also the HV host, in this case. So it really shouldn't have any issue... talking to itself. All storage is local, direct connected disks.
screenshot attached, if that helps any.
-
Looks like your hyperv switch is using a nat or something. Is your switch set to external?
-
@theopenem_admin
It wasn't, no. Looks like that may have done the trick, we're already at 10% now and that's farther than I've seen it go all week