No hard detected for deployment

Support
Log in to reply
  • dannyneunan

    Here is the configuration of the deploy profile for that image. 40320449-27e6-48b0-9eac-3efbea380cbe-image.png

    0
  • dannyneunan

    I believe I figured it out. When I changed the bios settings to AHCI it blew out the boot manager configuration. Once I loaded an operating system back on it from a usb drive and tried again with the AHCI it appears to be working. I'll give you a final report if it finishes without any problem. Stay tuned.

    0
  • dannyneunan

    It imaged fine after I got the boot manager back into the bios.

    0
  • T

    In that case you should probably just add the driver to your winpe so you can leave it on raid. This is the latest driver from intel
    https://www.intel.com/content/www/us/en/download/720755/intel-rapid-storage-technology-driver-installation-software-with-intel-optane-memory-11th-and-12th-gen-platforms.html

    Just download the zip, extract it and put it in your winpe/optional/drivers folder and rebuild winpe

    dannyneunan 1 Reply 0
  • dannyneunan

    @theopenem_admin do you mean I should drop the drivers in this exact location? I just want to confirm before I proceed.
    94e7dfe3-12c6-4470-9e9d-4eea2365047c-image.png

    0
  • T

    Yeah. You can put them in a sub folder also to keep them organized. The rapid storage driver has many versions depending on your processor generation. I put all of them in my winpe image. Then just rebuild winpe.

    dannyneunan 1 Reply 0
  • dannyneunan

    @theopenem_admin setting it back to RAID does not work in any configuration. I am able to get an image to take but on the reboot it never loads and crashes.

    07b00e1e-7a0d-418e-b4e9-1225b8901c2e-image.png

    0
  • T

    That's because your image doesn't have the needed drivers on it.

    dannyneunan 1 Reply 0
  • dannyneunan

    @theopenem_admin So I need to boot from the new SuperISO file I just created with the drivers added and then upload my universal image again?

    0
  • dannyneunan

    So I tried updating my image and tried to use the latest SuperISO bootable disk to upload to my openem server. The imaging process starts fine but finishes in like 60 seconds. I know that is not log enough. When I go to the server this is what I see.

    7b2a002e-f7c3-4ecf-b7e7-cff65a2be34e-image.png

    What am I missing here?

    0
  • dannyneunan

    Any suggestions? I'm kinda dead in the water at the moment. Thanks

    0
  • T

    I guess I'm unsure of the issue. Can't you just put the raid drivers into the image you are trying to deploy, instead of creating a new image?

    dannyneunan 1 Reply 0
  • dannyneunan

    @theopenem_admin I did. When I try to image now all it will do is create a 100M size image.

    0
  • dannyneunan

    I did find another post in the forums that is having the same issue I am having.
    7e2633a5-eb38-40ad-9c4f-1d872c5ec4bc-image.png
    This post did not have a resolution from what I can tell. Did this user get around the issue?

    0
  • T

    So you can't upload an image from any model? Can you post your com server multicast log?

    dannyneunan 1 Reply 0
  • dannyneunan

    @theopenem_admin This is from my virtual machine. In the past I have used a VM to create a universal image. It has worked perfectly until this update to my server. I have my image ready to go. I boot from the new SuperISO i create with the drivers added to it and it only creates the 100m file. I see a lot of the same error from the post I shared with you.

    0
  • dannyneunan

    I have gone so far as to try using the older ISO file from before I updated the server and now that does the same thing as the new ISO.

    0
  • dannyneunan

    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9152 --interface 10.1.80.86 --file e:\toems_local_storage\images\Windows11_v1\hd0\part1.winpe.wim

    10-18-21 11:29 Starting Upload Session Windows11_v1 With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9154 --interface 10.1.80.86 --file e:\toems_local_storage\images\Windows11_v1\hd0\part3.winpe.wim

    10-19-21 11:48 Starting Upload Session Windows11_v2_withOffice2019 With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9156 --interface 10.1.80.86 --file e:\toems_local_storage\images\Windows11_v2_withOffice2019\hd0\part1.winpe.wim

    10-19-21 11:48 Starting Upload Session Windows11_v2_withOffice2019 With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9158 --interface 10.1.80.86 --file e:\toems_local_storage\images\Windows11_v2_withOffice2019\hd0\part2.winpe.wim

    10-19-21 11:48 Starting Upload Session Windows11_v2_withOffice2019 With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9160 --interface 10.1.80.86 --file e:\toems_local_storage\images\Windows11_v2_withOffice2019\hd0\part4.winpe.wim

    03-09-22 10:22 Starting Upload Session Win10_21h2 With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9162 --interface 10.1.80.86 --file e:\toems_local_storage\images\Win10_21h2\hd0\part1.winpe.wim

    03-09-22 10:22 Starting Upload Session Win10_21h2 With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9164 --interface 10.1.80.86 --file e:\toems_local_storage\images\Win10_21h2\hd0\part2.winpe.wim

    03-09-22 10:23 Starting Upload Session Win10_21h2 With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9166 --interface 10.1.80.86 --file e:\toems_local_storage\images\Win10_21h2\hd0\part4.winpe.wim

    03-09-22 11:51 Starting Upload Session Win10_21H2_with_Office2019 With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9168 --interface 10.1.80.86 --file e:\toems_local_storage\images\Win10_21H2_with_Office2019\hd0\part1.winpe.wim

    03-09-22 11:51 Starting Upload Session Win10_21H2_with_Office2019 With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9170 --interface 10.1.80.86 --file e:\toems_local_storage\images\Win10_21H2_with_Office2019\hd0\part2.winpe.wim

    03-09-22 11:51 Starting Upload Session Win10_21H2_with_Office2019 With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9172 --interface 10.1.80.86 --file e:\toems_local_storage\images\Win10_21H2_with_Office2019\hd0\part4.winpe.wim

    03-09-22 01:11 Starting Upload Session Win10_21h2_Office2019 With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9174 --interface 10.1.80.86 --file e:\toems_local_storage\images\Win10_21h2_Office2019\hd0\part1.winpe.wim

    03-09-22 01:11 Starting Upload Session Win10_21h2_Office2019 With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9176 --interface 10.1.80.86 --file e:\toems_local_storage\images\Win10_21h2_Office2019\hd0\part2.winpe.wim

    03-09-22 01:11 Starting Upload Session Win10_21h2_Office2019 With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9178 --interface 10.1.80.86 --file e:\toems_local_storage\images\Win10_21h2_Office2019\hd0\part4.winpe.wim

    03-16-22 09:45 Starting Upload Session Win10_21h2_Office2019 With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9180 --interface 10.1.80.86 --file e:\toems_local_storage\images\Win10_21h2_Office2019\hd0\part1.winpe.wim

    03-16-22 09:45 Starting Upload Session Win10_21h2_Office2019 With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9182 --interface 10.1.80.86 --file e:\toems_local_storage\images\Win10_21h2_Office2019\hd0\part2.winpe.wim

    03-16-22 09:45 Starting Upload Session Win10_21h2_Office2019 With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9184 --interface 10.1.80.86 --file e:\toems_local_storage\images\Win10_21h2_Office2019\hd0\part4.winpe.wim

    07-14-22 01:28 Starting Upload Session Win11_OS_Only With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9186 --interface 10.1.80.86 --file e:\toems_local_storage\images\Win11_OS_Only\hd0\part1.winpe.wim

    07-14-22 01:29 Starting Upload Session Win11_OS_Only With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9188 --interface 10.1.80.86 --file e:\toems_local_storage\images\Win11_OS_Only\hd0\part3.winpe.wim

    07-14-22 01:45 Starting Upload Session Win11_OS_Only With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9190 --interface 10.1.80.86 --file e:\toems_local_storage\images\Win11_OS_Only\hd0\part4.winpe.wim

    07-14-22 03:57 Starting Upload Session Win10_v21h2 With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9192 --interface 10.1.80.86 --file e:\toems_local_storage\images\Win10_v21h2\hd0\part1.winpe.wim

    07-14-22 03:58 Starting Upload Session Win10_v21h2 With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9194 --interface 10.1.80.86 --file e:\toems_local_storage\images\Win10_v21h2\hd0\part3.winpe.wim

    07-14-22 03:58 Starting Upload Session Win10_v21h2 With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9196 --interface 10.1.80.86 --file e:\toems_local_storage\images\Win10_v21h2\hd0\part4.winpe.wim

    07-14-22 04:04 Starting Upload Session Win10_v21h2_OS_Only With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9198 --interface 10.1.80.86 --file e:\toems_local_storage\images\Win10_v21h2_OS_Only\hd0\part1.winpe.wim

    07-14-22 04:05 Starting Upload Session Win10_v21h2_OS_Only With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9200 --interface 10.1.80.86 --file e:\toems_local_storage\images\Win10_v21h2_OS_Only\hd0\part3.winpe.wim

    07-14-22 04:05 Starting Upload Session Win10_v21h2_OS_Only With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9202 --interface 10.1.80.86 --file e:\toems_local_storage\images\Win10_v21h2_OS_Only\hd0\part4.winpe.wim

    07-15-22 02:29 Starting Upload Session Win10v21H2_OS_Only With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9204 --interface 10.1.80.86 --file e:\toems_local_storage\images\Win10v21H2_OS_Only\hd0\part1.winpe.wim

    07-15-22 02:30 Starting Upload Session Win10v21H2_OS_Only With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9206 --interface 10.1.80.86 --file e:\toems_local_storage\images\Win10v21H2_OS_Only\hd0\part3.winpe.wim

    07-15-22 02:30 Starting Upload Session Win10v21H2_OS_Only With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9208 --interface 10.1.80.86 --file e:\toems_local_storage\images\Win10v21H2_OS_Only\hd0\part4.winpe.wim

    07-18-22 01:51 Starting Upload Session TestImage With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9210 --interface 10.1.80.86 --file e:\toems_local_storage\images\TestImage\hd0\part1.winpe.wim

    07-18-22 01:51 Starting Upload Session TestImage With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9212 --interface 10.1.80.86 --file e:\toems_local_storage\images\TestImage\hd0\part3.winpe.wim

    07-18-22 01:51 Starting Upload Session TestImage With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9214 --interface 10.1.80.86 --file e:\toems_local_storage\images\TestImage\hd0\part4.winpe.wim

    07-18-22 01:58 Starting Upload Session Testimage2 With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9216 --interface 10.1.80.86 --file e:\toems_local_storage\images\Testimage2\hd0\part1.winpe.wim

    07-18-22 01:58 Starting Upload Session Testimage2 With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9218 --interface 10.1.80.86 --file e:\toems_local_storage\images\Testimage2\hd0\part3.winpe.wim

    0
  • T

    That looks normal. Can you disable firewall if you haven't already

    0
  • dannyneunan

    Firewall is and has been disabled.

    0