No hard detected for deployment

Support
Log in to reply
  • dannyneunan

    @theopenem_admin do you mean I should drop the drivers in this exact location? I just want to confirm before I proceed.
    94e7dfe3-12c6-4470-9e9d-4eea2365047c-image.png

    0
  • T

    Yeah. You can put them in a sub folder also to keep them organized. The rapid storage driver has many versions depending on your processor generation. I put all of them in my winpe image. Then just rebuild winpe.

    dannyneunan 1 Reply 0
  • dannyneunan

    @theopenem_admin setting it back to RAID does not work in any configuration. I am able to get an image to take but on the reboot it never loads and crashes.

    07b00e1e-7a0d-418e-b4e9-1225b8901c2e-image.png

    0
  • T

    That's because your image doesn't have the needed drivers on it.

    dannyneunan 1 Reply 0
  • dannyneunan

    @theopenem_admin So I need to boot from the new SuperISO file I just created with the drivers added and then upload my universal image again?

    0
  • dannyneunan

    So I tried updating my image and tried to use the latest SuperISO bootable disk to upload to my openem server. The imaging process starts fine but finishes in like 60 seconds. I know that is not log enough. When I go to the server this is what I see.

    7b2a002e-f7c3-4ecf-b7e7-cff65a2be34e-image.png

    What am I missing here?

    0
  • dannyneunan

    Any suggestions? I'm kinda dead in the water at the moment. Thanks

    0
  • T

    I guess I'm unsure of the issue. Can't you just put the raid drivers into the image you are trying to deploy, instead of creating a new image?

    dannyneunan 1 Reply 0
  • dannyneunan

    @theopenem_admin I did. When I try to image now all it will do is create a 100M size image.

    0
  • dannyneunan

    I did find another post in the forums that is having the same issue I am having.
    7e2633a5-eb38-40ad-9c4f-1d872c5ec4bc-image.png
    This post did not have a resolution from what I can tell. Did this user get around the issue?

    0
  • T

    So you can't upload an image from any model? Can you post your com server multicast log?

    dannyneunan 1 Reply 0
  • dannyneunan

    @theopenem_admin This is from my virtual machine. In the past I have used a VM to create a universal image. It has worked perfectly until this update to my server. I have my image ready to go. I boot from the new SuperISO i create with the drivers added to it and it only creates the 100m file. I see a lot of the same error from the post I shared with you.

    0
  • dannyneunan

    I have gone so far as to try using the older ISO file from before I updated the server and now that does the same thing as the new ISO.

    0
  • dannyneunan

    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9152 --interface 10.1.80.86 --file e:\toems_local_storage\images\Windows11_v1\hd0\part1.winpe.wim

    10-18-21 11:29 Starting Upload Session Windows11_v1 With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9154 --interface 10.1.80.86 --file e:\toems_local_storage\images\Windows11_v1\hd0\part3.winpe.wim

    10-19-21 11:48 Starting Upload Session Windows11_v2_withOffice2019 With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9156 --interface 10.1.80.86 --file e:\toems_local_storage\images\Windows11_v2_withOffice2019\hd0\part1.winpe.wim

    10-19-21 11:48 Starting Upload Session Windows11_v2_withOffice2019 With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9158 --interface 10.1.80.86 --file e:\toems_local_storage\images\Windows11_v2_withOffice2019\hd0\part2.winpe.wim

    10-19-21 11:48 Starting Upload Session Windows11_v2_withOffice2019 With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9160 --interface 10.1.80.86 --file e:\toems_local_storage\images\Windows11_v2_withOffice2019\hd0\part4.winpe.wim

    03-09-22 10:22 Starting Upload Session Win10_21h2 With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9162 --interface 10.1.80.86 --file e:\toems_local_storage\images\Win10_21h2\hd0\part1.winpe.wim

    03-09-22 10:22 Starting Upload Session Win10_21h2 With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9164 --interface 10.1.80.86 --file e:\toems_local_storage\images\Win10_21h2\hd0\part2.winpe.wim

    03-09-22 10:23 Starting Upload Session Win10_21h2 With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9166 --interface 10.1.80.86 --file e:\toems_local_storage\images\Win10_21h2\hd0\part4.winpe.wim

    03-09-22 11:51 Starting Upload Session Win10_21H2_with_Office2019 With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9168 --interface 10.1.80.86 --file e:\toems_local_storage\images\Win10_21H2_with_Office2019\hd0\part1.winpe.wim

    03-09-22 11:51 Starting Upload Session Win10_21H2_with_Office2019 With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9170 --interface 10.1.80.86 --file e:\toems_local_storage\images\Win10_21H2_with_Office2019\hd0\part2.winpe.wim

    03-09-22 11:51 Starting Upload Session Win10_21H2_with_Office2019 With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9172 --interface 10.1.80.86 --file e:\toems_local_storage\images\Win10_21H2_with_Office2019\hd0\part4.winpe.wim

    03-09-22 01:11 Starting Upload Session Win10_21h2_Office2019 With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9174 --interface 10.1.80.86 --file e:\toems_local_storage\images\Win10_21h2_Office2019\hd0\part1.winpe.wim

    03-09-22 01:11 Starting Upload Session Win10_21h2_Office2019 With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9176 --interface 10.1.80.86 --file e:\toems_local_storage\images\Win10_21h2_Office2019\hd0\part2.winpe.wim

    03-09-22 01:11 Starting Upload Session Win10_21h2_Office2019 With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9178 --interface 10.1.80.86 --file e:\toems_local_storage\images\Win10_21h2_Office2019\hd0\part4.winpe.wim

    03-16-22 09:45 Starting Upload Session Win10_21h2_Office2019 With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9180 --interface 10.1.80.86 --file e:\toems_local_storage\images\Win10_21h2_Office2019\hd0\part1.winpe.wim

    03-16-22 09:45 Starting Upload Session Win10_21h2_Office2019 With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9182 --interface 10.1.80.86 --file e:\toems_local_storage\images\Win10_21h2_Office2019\hd0\part2.winpe.wim

    03-16-22 09:45 Starting Upload Session Win10_21h2_Office2019 With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9184 --interface 10.1.80.86 --file e:\toems_local_storage\images\Win10_21h2_Office2019\hd0\part4.winpe.wim

    07-14-22 01:28 Starting Upload Session Win11_OS_Only With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9186 --interface 10.1.80.86 --file e:\toems_local_storage\images\Win11_OS_Only\hd0\part1.winpe.wim

    07-14-22 01:29 Starting Upload Session Win11_OS_Only With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9188 --interface 10.1.80.86 --file e:\toems_local_storage\images\Win11_OS_Only\hd0\part3.winpe.wim

    07-14-22 01:45 Starting Upload Session Win11_OS_Only With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9190 --interface 10.1.80.86 --file e:\toems_local_storage\images\Win11_OS_Only\hd0\part4.winpe.wim

    07-14-22 03:57 Starting Upload Session Win10_v21h2 With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9192 --interface 10.1.80.86 --file e:\toems_local_storage\images\Win10_v21h2\hd0\part1.winpe.wim

    07-14-22 03:58 Starting Upload Session Win10_v21h2 With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9194 --interface 10.1.80.86 --file e:\toems_local_storage\images\Win10_v21h2\hd0\part3.winpe.wim

    07-14-22 03:58 Starting Upload Session Win10_v21h2 With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9196 --interface 10.1.80.86 --file e:\toems_local_storage\images\Win10_v21h2\hd0\part4.winpe.wim

    07-14-22 04:04 Starting Upload Session Win10_v21h2_OS_Only With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9198 --interface 10.1.80.86 --file e:\toems_local_storage\images\Win10_v21h2_OS_Only\hd0\part1.winpe.wim

    07-14-22 04:05 Starting Upload Session Win10_v21h2_OS_Only With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9200 --interface 10.1.80.86 --file e:\toems_local_storage\images\Win10_v21h2_OS_Only\hd0\part3.winpe.wim

    07-14-22 04:05 Starting Upload Session Win10_v21h2_OS_Only With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9202 --interface 10.1.80.86 --file e:\toems_local_storage\images\Win10_v21h2_OS_Only\hd0\part4.winpe.wim

    07-15-22 02:29 Starting Upload Session Win10v21H2_OS_Only With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9204 --interface 10.1.80.86 --file e:\toems_local_storage\images\Win10v21H2_OS_Only\hd0\part1.winpe.wim

    07-15-22 02:30 Starting Upload Session Win10v21H2_OS_Only With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9206 --interface 10.1.80.86 --file e:\toems_local_storage\images\Win10v21H2_OS_Only\hd0\part3.winpe.wim

    07-15-22 02:30 Starting Upload Session Win10v21H2_OS_Only With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9208 --interface 10.1.80.86 --file e:\toems_local_storage\images\Win10v21H2_OS_Only\hd0\part4.winpe.wim

    07-18-22 01:51 Starting Upload Session TestImage With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9210 --interface 10.1.80.86 --file e:\toems_local_storage\images\TestImage\hd0\part1.winpe.wim

    07-18-22 01:51 Starting Upload Session TestImage With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9212 --interface 10.1.80.86 --file e:\toems_local_storage\images\TestImage\hd0\part3.winpe.wim

    07-18-22 01:51 Starting Upload Session TestImage With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9214 --interface 10.1.80.86 --file e:\toems_local_storage\images\TestImage\hd0\part4.winpe.wim

    07-18-22 01:58 Starting Upload Session Testimage2 With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9216 --interface 10.1.80.86 --file e:\toems_local_storage\images\Testimage2\hd0\part1.winpe.wim

    07-18-22 01:58 Starting Upload Session Testimage2 With The Following Command:
    cmd.exe /c "C:\Program Files\Theopenem\Toec-API\private\apps\udp-receiver.exe" --portbase 9218 --interface 10.1.80.86 --file e:\toems_local_storage\images\Testimage2\hd0\part3.winpe.wim

    0
  • T

    That looks normal. Can you disable firewall if you haven't already

    0
  • dannyneunan

    Firewall is and has been disabled.

    0
  • T

    The only suggestion I have would be to change the imaging mode to smb instead.

    dannyneunan 1 Reply 0
  • dannyneunan

    @theopenem_admin What is involved in that? Did that suggestion work for the other guy?

    0
  • T

    Not sure he never replied.

    You just need to create an smb share at the root of your local storage location, then change your storage location to smb in admin settings-> storage location, then admin settings-> imaging client enable upload / deploy direct to smb

    0