Welcome to the community forums for Theopenem. All responses are provided by other users that wish to help out. Theopenem will not respond to these posts. If you require more assistance than what the community can provide, we offer various paid support options.


  • Hello,

    unfortunately there is a problem with the PXE boot:

    Theopenem 1.5.2
    Winsrv 2019
    .Net 4.8
    Image client: ASUS P550L
    The DHCP_Server spends its IPs from another client with dhcpsrv2.5.2

    During the first PXE boot I get an error message (see photos): PXE-E11: ARP timeout

    I have already tested all PXE settings and also changed the kernel. Unfortunately all without success.

    Where could the error be found?

    Best regards

    20230219_171314.jpg 20230219_171249.jpg 20230219_171241.jpg 20230219_171228.jpg


  • It looks like you are using a different TFTP server and not the one that is included with Theopenem. It must be configured in the same way. Your root tftp path is not set correctly.


  • @theopenem_admin

    20230220_174731.jpg

    ...as far as I can see, only one TFT server is active (tftpd32 for use with Thoepenem - see photo).

    I found this in the forum. Could this be the solution? If so, where can I make the extension:

    @itisljar

    To reply to myself, the problem was this:

    set ComServerURL=http://10.1.36.30/
    It NEEDS to have port set up, too. It should look like this:

    set ComServerURL=http://10.1.36.30:8888/
    Now just to learn how to set up HR keyboard, that would be grand 🙂 anyone?
    EDIT: I'm dumb. Configuration for keyboard is in CMD file for building WIE.


  • @sesam ...another addition: This test was successful.

    20230220_220437.jpg


  • @sesam ....ok - anyway...it suddenly works ;)!