Image automatically
-
@theopenem_admin Absolutely worth the effort. Remote imaging without having to physically touch a machine is crucial in an education environment where we image computer labs all over campus. We're currently using Ghost which has been doing this for years but would like to move away from it.
-
I'm not sure we are talking about the same thing. Theopenem can already image a machine without needing to physically touch it. @jithinpsk is talking about re-imaging a machine by kicking of a task while that computer is in Windows without the need to pxe boot. This assumes the computer is currently functional and can communicate with Theopenem ahead of time.
-
@theopenem_admin Apologies. We're talking about same thing. Re-imaging a machine that's running in windows with the client installed. We have the same scenario as jithinpsk. Currently with Ghost, we select a task to re-image a lab. The computers reboot into WinPe and boot up the Ghost client to connect to our Ghost server. No USB or PXe required.
-
Understood. Thanks. I'll keep this on my radar. It's probably fairly easy to implement. The needed pieces are already there.
-
@theopenem_admin Thank you! That would be amazing!
-
@theopenem_admin Apologies for not being clear. I wasn't aware of the feature where we can image without touching the computer. What is that option called?
Because of the IT security restrictions we cannot enable PXE boot in our classrooms. Currently we boot these devices from USB and image them. It takes a lot of time and effort for this repetitive process.
Thank you for looking into this.
-
If somebody is looking at a similar solution, you can use PowerShell to do this. This is not my script, but it works perfectly.
<# .Synopsis This script will create a ramdisk containing the boot.wim which the computer will boot to on restart. This script will work only on Windows Imaging environment. .Prerequisites - From the Windows PE boot USB, copy boot.wim in the Sources folder to C:\Sources on the target - From the Windows PE boot USB, copy the Boot folder to C:\ on the target .Notes Because "bcdedit /bootsequence" is used, the computer should boot back into Windows when restarted if imaging is cancelled. #> # Checks that Disk 0 is the boot disk. $DISKZERO = Get-Disk 0 If ($DISKZERO.IsBoot -ne $true) { Write-Host "Disk 0 is not the boot disk. Exiting..." Exit 999 } else { Write-Host "Disk 0 is the boot disk. Proceeding..." } # Create {ramdiskoptions} and configure bcdedit -create "{ramdiskoptions}" bcdedit /set "{ramdiskoptions}" ramdisksdidevice partition=C: bcdedit /set "{ramdiskoptions}" ramdisksdipath \boot\boot.sdi # Add LiteTouch boot device to OSLOADER $Output = bcdedit -create /d "LiteTouch MDT" /application OSLOADER # Obtain LiteTouch boot device GUID $LTGUID = $Output | %{ $_.split(' ')[2] } # Configure LiteTouch to ramdisk boot bcdedit /set $LTGUID device "ramdisk=[C:]\sources\boot.wim,{ramdiskoptions}" bcdedit /set $LTGUID osdevice "ramdisk=[C:]\sources\boot.wim,{ramdiskoptions}" bcdedit /set $LTGUID systemroot \windows bcdedit /set $LTGUID detecthal yes bcdedit /set $LTGUID winpe yes # Adjust for UEFI vs Legacy BIOS types if ($env:firmware_type -eq 'UEFI'){ Write-Host "UEFI boot confirmed." bcdedit /set $LTGUID path \windows\system32\boot\winload.efi } Else { Write-Host "Legacy boot confirmed." bcdedit /set $LTGUID path \windows\system32\boot\winload.exe } # Force LiteTouch ramdisk on next boot and restart bcdedit /bootsequence $LTGUID shutdown /r /f /t 0 -
This is now available in 1.5.0.
-
@theopenem_admin how to use this feature? I tried to upload the PXE files and the upload fails.
-
To use the new feature you need to upload the boot.sdi and winpe10x64.wim files that were created from wie_build. Don't rename them. Are you able to upload files in other modules? to make sure this isn't an upload setting issue?
-
@theopenem_admin I am unable to upload files for any other modules. I checked logs and couldn't find any.
-
Did you set the upload url in web.config when you installed?
-
-
@theopenem_admin my bad! I made a mistake in the IP. Modified it the correct ip now. Do I need to do anything on the server side for it to take effect?
-
no, that's it.
-
@theopenem_admin Thank you.