Trouble booting into iPXE from new HP Probook 440 G11
-
@theopenem_admin I copied the old ipxe file back and updated the pxe settings. I get this error when I do that, I don't know if it would be relevant.
"Updated Settings Successfully, But Could Not Copy PXE Binaries On One Or More Com Servers. Check The Logs For More Info"
The old file works on my old device again.
-
I can't seem to replicate this, the latest version seems to be working for me. Are you using the proxy dhcp service, how are your dhcp options setup?
-
Also, can you send me your original ipxe file that is working for the old models.
-
ipxe.zip @theopenem_admin We are using the DHCP proxy. Here is a screenshot of the options in the server.
Also, I attached my original ipxe file that works.Thanks for the help!
-
@theopenem_admin Also, we have two other DHCP policies set up for 32-bit and BIOS respectively in the DHCP server. But, we really don't use them these days.
-
I can't see any difference b/w your file and the new one. Your DHCP config is a little strange. If you are setting options in your DHCP scope then you are not using the proxy. Do you have toems dhcp proxy service running?
-
@theopenem_admin Oh, I didn't realize that. I do have Toem's DHCP proxy installed and running. I'll need to take a look at the instructions again. I set it all up years ago. It sounds like I may not even need the DHCP proxy, we only have 64-bit EFI devices now.
-
Yea, i would turn off the proxy since your DHCP is already setup to handle the different bootloaders. Also, remove the option 60 PXEClient.
-
@theopenem_admin Thanks! will try that tomorrow and see what happens.
-
@theopenem_admin I believe that fixed the issue. I stopped the proxy DHCP service, removed option 60 from the DHCP server, and switched off proxy DHCP in the settings page and set it to ipxe 64-bit. My old device is now loading! I would test the new HP 440 device, but we had to send it off. I'll have to test that device later, but I'm confident it will work now. Thanks for all the help!