Sysprep Answer File Not Found
-
Can you post the deploy log
-
@theopenem_admin Where can I find that?
-
-
Looks like it didn't upload correctly. Did you set the upload ip on your com server.
-
@theopenem_admin Yes
-
are you uploading from hyper v?
-
@theopenem_admin No, I sysprep'ed the image on a desktop, had it shutdown. then booted to the theopenem USB client and selected "Upload"
-
Ok, sometimes people have the networking setup wrong with hyperv that can cause issues. Can you post the upload log?
-
-
Don't see anything that really stands out, other than file size looks strange? How much space is the image using on your hard drive?
-
@theopenem_admin Huh, now that you mention it it's only 21MB...Let me try uploading again.
-
@theopenem_admin After paying closer attention to the upload process, I noticed it was capturing from a volume on the bootable USB rather than the windows volume. Thoughts?
-
Are you sure, your logs don't indicate that is happening? Can you post the log from admin settings->logs->com server logs->multicast.log
-
-
@theopenem_admin It's possible I'm misunderstanding the output from the script. I'll try letting the upload complete and report back.
-
@theopenem_admin
Upload: https://pastebin.com/1PXLh8UF
Deploy: https://pastebin.com/smtiKzPn
Ran into the same issue. -
At a loss here. Everything looks normal, it seems to me that during the upload, the process is stopping during the data transfer. They only thing that comes to mind is firewall.
-
@theopenem_admin I'll talk to our sysadmin team and see if the firewall might be blocking it.